117 Series UE Pressure Switch

Overview :

 

Approved for Division 2, Zone 2 hazardous and corrosive atmospheres, and with optional Zone 0 intrinsic safety compliance,
the 117 Series can be used to measure vacuum, pressure, differential pressure, or temperature in a variety of applications. The rugged, one piece enclosure features a slanted cover for wiring accessibility to the enclosed terminal block that is wired to either a SPDT or DPDT hermetically sealed microswitch. All welded,stainless steel pressure connections and sensors provide superior corrosion resistance – NACE compliant – and fire-safe protection within the harshest environments. The 117 Series is an ideal choice for the most demanding applications; typically steel and aluminum mills, chemical and petrochemical plants, pulp and paper mills, wastewater treatment plants, midstream and downstream oil & gas,and pharmaceutical plants.

 

Specifications :

 

Storage temperature                    -65° to 160°F (-54 to 71°C)

ambienttemperature limitS            -40° to 160°F (-40° to 71°C); except models 520-525, 540-548, 700-706: 0 to 160°F (-18 to
                                                     71°C); set point typically shifts less than 1% of range for a 50°F (28°C) ambient temperature
                                                     change

Set point repeatability Temperature models:     ± 1% of adjustable range
                                                                           Pressure models 171-174, 218, 358-376, 520-535, 540-543 and 700-706: ± 1% of adjustable range; models 183-194, 544-548, 483-494, 565-567: ± 1.5%       of adjustable  Internal set point lock on all pressure models

 

Shock                                           Set point repeats after 15 G, 10 millisecond duration

 

Vibration                                      Set point repeats after 2.5 G, 5-500 Hz

 

EncloSure                                    Die cast aluminum, epoxy powder coated, gasketed; captive cover screws; anodized         aluminum nameplate

 

EncloSure claSSification               Enclosure Type 4X

 

Switch output                          One SPDT hermetically sealed snap action switch; switch may be wired “normally open” or
                                               “normally closed”; DPDT (option 1190/1195)

 

Electrical rating                      11 A 125/250 VAC resistive; 5 A @ 28 VDC; 1 A @ 48 VDC; 1/2 A @ 125 VDC; switch
                                               contacts gold flashed

 

Weight                                   1.5-6.5 lbs. Varies with model

 

Electrical connection            1/2” NPT (female); two 7/8” diameter knockouts

 

Pressure connection            Models 218, 358-376, 700-706: 1/4” NPT (female); models 171-194, 483-494, 520-535:
                                             1/2” NPT (female); models 565-567: 1.5” flush mount connection (mates with Tri-Clamp®
                                             fitting systems), models 540-548: 1/8” NPT (female)

 

Temperature  aSSembly       Bulb and capillary: 6 feet; 304 stainless steel
                                            Immersion stem: nickel-plated brass (standard); optional 316L stainless steel

 

Fill                                          Non-toxic oil filled

 

Temperature deadband        Typically 4% of range under laboratory conditions (70°F ambient circulating bath at rate of
                                            1/2°F per minute change)

 

Reference Scale                  Pressure: “High-Low” reference scale
                                            Temperature: reference dial

Technical parameters :

 

 

Products Show :

Why chose us :